Cement industry

Acid Resistant Mortar is made with over42.5 grade ordinary Portland cement, sand and powder made of compact sand, quartzite and igneous rock, and adding suitable sodium silicate and sodium fluosilicate. Acid Resistant Mortar is mainly used as lining material, acid floor and acid protective layer.

Features： Aluminum silicate ceramic fiber tape is mainly made of fiber cotton. It can withstand a continuous high temperature of 1000℃ and has an upper limit of service temperature up to 1260℃. Aluminum silicate ceramic fiber tape has excellent resistance to acid and alkali corrosion

Features： Asbestos wool is a natural mineral fiber with excellent tensile strength, heat insulation, corrosion resistance and low flammability. Due to its comprehensive properties, asbestos wool is widely used in modern transportation, chemical and electrical equipment, construction industry and defense technology, etc. Advantage： It can

Composition of 85% aluminum oxide. Reduce the use of refractory materials, improve production efficiency, and promote green environmental protection.Used in chemical engineering, refractory materials, abrasives, cement, steel, petroleum, etc

Ceramic fiber paper is made of selected aluminum silicate ceramic fiber cotton as the main raw material by wet forming process. It is characterized by no asbestos, uniform fiber distribution, white color, no delamination, less slag ball, flexible adjustment of bulk density according to use, high strength (including reinforced fiber), good elasticity and strong machinability. Because of the different temperature, it is divided into three kinds of materials, standard, high aluminum, zirconium ceramic fiber paper.

Ceramic fiber blanket is made of refractory ceramic fiber, fiber blanket color white, set fire resistance, heat insulation, heat preservation function in one, does not contain binder. It can maintain good tensile strength, toughness and fiber structure during use. The product is not affected by oil corrosion and can recover its thermal and physical properties after drying. It has good chemical stability, good insulation effect to reduce heat loss, improve thermal efficiency, and provide an effective solution for a wide range of thermal management problems. It is widely used in the fields of fire resistance, heat insulation and heat preservation in various industries.

Hard firebrick is a kind of alumina silicate brick containing 35-45%, and the refractories are SK 32-34. Brick is made of refractory clay, calcined limestone, mullite and other raw materials, with good wear resistance, peeling resistance, corrosion resistance. It has the characteristics of low porosity, high strength, heat peeling, wear resistance, creep resistance, etc., and is widely used in the lining of coke oven, glass kiln, cement rotary kiln, lime kiln, various incinerators and heating furnaces.

high alumina castable is made of high-alumina bauxite aggregate as the main raw material, and according to the proportions of different granules, calcium aluminate cement binders and admixtures are added to mix the bulk cast refractory castables. It can be used directly after adding water

t has good high temperature fire resistance High temperature resistance, good fire resistance Low impurity content Good thermal shock resistance Excellent resistance to slag wear Good cold pressing strength Applications Of High Alumina Brick Nonferrous Metal Furnace Rotary & Shaft Kiln Various Incinerator Reheating Furnace Permanent Lining For EAF Ladle General Industrial Furnace etc.

Sillimanite has stable chemical properties, good thermal shock resistance, high refractoriness, good mechanical strength and other characteristics, can be used as ceramics, refractory materials, synthetic mullite, welding materials, friction materials and other raw materials, is widely used in metallurgy, chemical industry, ceramics, glass and other fields.

Refractory castable is a granulated and powdery material made by adding a certain amount of binder to refractory aggregate. It has high fluidity and is shaped by casting. The castable binder produced by our company has high moisture content, good fluidity, high strength and corrosion resistance, and can be selected according to the conditions of use. It can be directly poured into the lining body, and can be made into prefabricated blocks by pouring or shaking. It is mainly used for the lining parts of various industrial kilns such as incinerators and non-ferrous metal smelting furnaces. Features Of Refractory Castable

High refractoriness, High refractoriness under load
High density, low porosity
Good slag resistance and corrosion resistance
High strength and wear resistance
Good resistance to flake performance
Good thermal shock stability
Scouring resistance
Good hot strength

Applications Of Refractory Castable

mainly used in heat treatment furnace,heating furnace,soaking pit furnace,tundish slag dam weir,seconclary refining and the catalytic cracking unit etc key part of kiln furnace and thermal equipment.

Al2O3: ≥65-78%; Refractoriness: ≥1700-1780ºC; Bulk Density: 2.15-2.65g/cm³; Cold Modulus of Rupture: ≥4.0-7.0MPa; Cold Crushing Strength: 25-40MPa; Physical Parameters of High Aluminum Refractory Castables Item G-15B G-15 G-16 Maximum service temperature，℃ 1400 1500 1600 Al2O3 ，% ≥65 ≥75 ≥78 SiO₂，% 25 20 15 B.D After Drying at 110℃，g/cm³